Shoe dryer Timson UV Smart

Timson UV SMART Ultraviolet Shoe Dryer for Antifungal and Antibacterial Treatment of Footwear, Helping Prevent Foot and Nail Fungus

Instructions for Use. General Information

1.1. The Timson UV shoe dryer for antifungal treatment is an innovative solution designed to eliminate fungi, bacteria and unpleasant odours from your footwear.

1.2. The device provides reliable protection of footwear against fungi and bacteria.

1.3. The temperature inside the device during drying reaches +60 to +70°C. The temperature inside the footwear during drying is approximately +40°C.

1.4. The device is intended for personal footwear care and the prevention of fungal infections.

1.5. The device helps preserve the quality of footwear and extend its service life.

2. Automatic shut-off after 8 hours of operation

The automatic shut-off function helps to:

• significantly improve operating safety if you forget to switch the device off;
• reduce electricity consumption;
• extend the service life of the device.

3. Safety Precautions

This device is not intended for use by children or persons with reduced physical, sensory or mental capabilities, or by persons lacking knowledge and experience, unless they are supervised or have been instructed in the safe use of the device by a person responsible for their safety.

Children must be supervised to ensure that they do not play with the device.

Warning! Keep the device out of reach of children!

3.1. The following is prohibited:

• connecting the device to a faulty electrical socket;
• using the device if the housing or power cord is mechanically damaged. The power cord may only be replaced by the manufacturer;
• carrying or hanging the switched-on device by its power cord;
• opening the device or looking closely at the UV lamps;
• leaving the operating device unattended.

3.2. Do not allow liquids or metal objects to enter the device housing.

3.3. Under no circumstances should the device be immersed in water or any other liquid.

3.4. After 6–8 hours, when the device has stopped operating, remember to unplug it from the mains.

4. Technical Specifications

4.1. The device consists of a pair of identical rounded, shoe-shaped inserts. The inserts are electrically connected to a common power cord with a plug for connection to the mains.

4.2. Each insert has several openings (ventilation slots) for ultraviolet radiation and heat dissipation.

4.3. Technical data:

• Voltage: 220 V AC ±10%, 50 Hz
• Power consumption: no more than 9 W
• Weight: no more than 0.4 kg
• Time required to reach the operating mode: 30 minutes or less
• Recommended footwear treatment time: at least 8 hours
• Number of UV lamps in each insert: 4
• Number of heating elements in each insert: 1
• Electrical safety: Class II, Type B

5. Package Contents

5.1. Timson UV shoe dryer.
5.2. Instructions for use and warranty.
5.3. Special packaging.

6. Preparation for Use

6.1. After prolonged storage or transportation at temperatures below +10°C, leave the device at room temperature between +10°C and +30°C for at least 4 hours before use.

6.2. Make sure there is no water, snow or any metal objects inside the footwear.

6.3. Insert the device into the footwear and plug the power cord into a 220 V electrical socket.

7. Operation

7.1. When the device is switched on, the UV light sources and resistive heating elements are activated simultaneously.

7.2. The inside of the footwear is simultaneously exposed to UV radiation and heat. This helps eliminate fungi, bacteria and unpleasant odours while the footwear is thoroughly dried.

8. Storage Conditions

8.1. Protect the device from mechanical impact and damage.

8.2. Store the device in its original/special packaging with the power cord neatly coiled.

9. Warranty

The manufacturer provides a 24-month warranty from the date of purchase. The warranty does not apply if the purchaser fails to follow the instructions for use.

During the warranty period, the device will be replaced by the seller. Proof of purchase must be provided for warranty service.